10.11.2014

Waiting game

Well, the doctor's due date for me (last Monday, the 6th) came and went; and my own calculated due date (today, the 11th) has come and nearly gone.  It's been surprisingly hard to be patient for baby!  Until the 6th, I wasn't feeling ready to have baby, but now I'm eager and anxious!  

We've had a busy week putting my parents to work, and trying to check things off our to-do list; as well as trying to get rest and let them have plenty of play time with Marlin. He's certainly loving the attention! (And so are they!)

As for the house, things are progressing! They've finished painting all the interior walls! It was hard to finalize colors; and I'm not sure I'm 100% happy with all my selections now that it's painted, but at least paint can be painted over if o really decide I'm not happy.  Also, I think once all the other stuff gets finished, it will all come together!   The exterior is close to being done, except getting painted (the boards and battens will all be one color), which happens Monday! 

The garage door is installed, and the trees that we got milled into lumber was delivered!  We are planning to use it for baseboard and door trim; but we still have lots of sanding and sealing to do to it for it to be finished for install! (This is when the timing of house and baby and Ryan's busy work schedule all get just a little tricky!) 

The question I'm sure you're wondering, is when will it be done so we can move in?! 
Just like baby, it's a bit of a mystery to us all.  The house will be done when it's done, and baby will be here when s/he's ready!

Patience....

10.04.2014

Boards, battens...no baby.

Besides more drywall mudding (boring....), the details of the siding are going up...the corrugated metal wainscot and the battens are getting installed, which definitely is starting to complete the look! 


Also, no baby yet. I had a bit of a false alarm during the night last night when I thought/wondered if maybe the start of labor was happening. I was wrong - it passed and haven't had anything today.  Fine by me. I'm a procrastinator and kind of hoping baby won't come until Monday or later.  I'll keep you posted!

10.02.2014

Love this boy!

I just picked all the bell peppers out of the garden and they were sitting in a bowl on the counter. 

This boy just grabbed one little green one and started eating it like an apple, and he's still going! 


Oh yeah...and on the food front, I've had liver in the freezer, because I know it's a good source of protein and nutrients for pregnancy; and it was free from the family ranch; so I've been meaning to embark on the liver adventure. I've never cooked or eaten it but was open minded that it might not be so bad despite most people's aversion to it. 

Well...I'm not so sure anymore. I carmelized some delicious onions to go with it and managed to eat a decent amount by burying them in mashed potatoes and onions, but I must admit I was just about gagging on every other bite.  It's just, um, "fickery" as Marlin would say.  It's his made up word for things that taste, well...I don't know, because he made it up...but liver is definitely fickery. 

I was feeling less than excited about the dinner I had put on the table once I took a bite, but a few bites in Marlin said "thanks for cooking, mama!" And then proceeded to eat quite a bit of the liver.  

...I keep trying to pawn off the leftovers on him, but he's not really having it the second time around, haha! 

9.30.2014

Lots to do before baby!

Life's feeling a little busy...feels like I'm rushing to beat a deadline...a deadline that isn't fixed: baby could come any day now! 

My official due date is next Monday, October 6th, so I'm in that zone where it could happen any day now, but I'm hoping baby stays in at least a few more! 

As for the house, the drywallers have been plugging away slowly but surely on the taping and mudding - there's a lot of timber frame beams and corners and details to work around in the upstairs of the house - so it's taking even longer than everyone thought!
 
The nice thing about that is it's given me more time to pick out paint colors, which is a decision I haven't been good about. Countless samples and deliberations later, I think I've decided on it all. And, it is time to pretty much get everything else that was still not in set in stone, picked and ordered and coordinated.  Lighting, cabinet hardware, faucets, plumbing fixtures, retaining walls, etc etc etc. Though I have been considering and narrowing in on all of these things for awhile, you all know I'm a bit of a procrastinator and I have to research all my options, so the task has been expanding to fill all the time I possibly could get to deliberate. In fact, I've been driving myself crazy, and really wish I was better about making decisions like this little by little, one at a time and moving on without looking back!  

But now baby's going to be here any minute and I'd rather not be thinking about all this when I'm sleep deprived and adjusting to having #2 in the house! 

More details on the exterior have been getting installed, such as trim work for where the metal wainscot will go, as well as the front porch roof:

The deck overhang has been installed, and they're back at hanging the rest of the exterior siding. 

Here's some of the corrugated metal wainscot in place! Looking forward to seeing the siding with its battens in place and its final color painted, as well as the dark fascia trim to make everything pop.

A glimpse of the interior finishes:

Besides the house and the baby, Ryan's various work ventures have been keeping him busier and been more demanding than ever, as he's on the verge of signing and buying into a new partnership agreement with colleagues, alongside his part time work and involvement elsewhere.  It's exciting but certainly stressful.  

We're thankful for all these blessings, just sometimes wish it wasn't all happening AT ONCE!!!  

Thankfully, Marlin is doing great through it all. He was a trooper yesterday while I ran countless errands.  And even though we just had a major 4 pm 3 year old "I want to watch a video and you're making me have quiet time instead since I'm over tired" meltdown; he's really been doing great, behaving well and patient at various appointments and errands I drag him on.  At the doctor today, he was telling her how he's going to help with changing diapers and reading stories to the baby.  It was pretty sweet and I can't wait to watch him as a big brother!


Fall along the creek at our new place:


Should probably go pack that hospital bag...whaddya think? When's baby going to be here, and is it a girl or boy?!

9.20.2014

Plumbing, Electrical and The Blower Door Test!

Even though a lot has happened on the house in the last couple weeks, it's been in smaller bits and pieces that I hadn't gotten good pics of. 

Let's see where I left off...

Wow. I guess a lot has happened! 

All the plumbing and electrical "rough-in" got completed. Here's some interior shots of the framed walls:


The timber frame portion and ceiling of the front porch got installed! Still needs the metal roof, and the actual porch/deck part will wait (I think) until some dirt gets moved around. 

Todd installed the ERV system, which stands for energy (or enthalpy) recovery ventilator. Basically it's a fancy ventilating system that always brings in fresh air and exhausts the stale air but captures the heat (or cold - depending on what you're trying to do) at a high efficiency to use with the fresh air. In other words, it moves the air (always fresh) throughout our space; and it manages the humidity. and it seems like a slick way to move air around without a typical furnace, dusty air ducts, uncomfortable air movement. It runs at a really low rate of air flow all the time, and consists of small plastic ducts that run through the stud walls and shouldn't collect dust and pollutants the way typical metal ducts do. We shall find out how it all works once we're living in it for awhile!


It's pretty much a necessity for a tightly sealed house, from the research I've done.  Which brings me to... 

The blower door test! This is one of those things that I and our builder kind of geeked out on. So hopefully I don't bore you with the following...! Feel free to tune out and skip to the end!

It's a way to measure how air-tight your house is and if done before drywall is complete, it provides a way to find leaks that can be sealed before the construction is done.  In fact, it's such a key piece of energy efficient construction that air-tightness is a major requirement of certification under the "Passive House" standards that are modeled after Germam energy efficient construction methodologies.  Though I did a lot of research and am quite familiar with several different energy efficiency models, such as LEED, passive solar design, Energy Star Homes, and Passive House, we chose not to follow one particular subscribed path in order to receive any official certification. Rather I used a variety of design principles and bits and pieces of each, as well as the help of an energy consultant out of Denver. The Passive House standard requires a strict air tightness measurement of 0.6 ACH @ 50 pascals (air changes per hour at a particular pressure).  The Energy Star program requires between 3 and 6 ACH, depending on climate zone. I decided that I would be quite happy with a target of 1 ACH, so the energy model and the HVAC system were designed to that goal. 

Why is air tightness so important, you ask? What about moisture build up, fresh air, letting the home breathe, etc? The way I see it (after living in several very leaky homes and wasting a lot of electricity to send heat right out the cracks around a poorly installed and sealed window, or right through poorly insulated floors and walls), I'd much rather have control over the ventilation and heating/cooling of the space rather than letting the leaks decide! Hence the ERV system discussed above. 

Though it seems so important to me, our builder could only find one guy locally that has the equipment and know-how to do blower door tests. He's on the verge of retirement, but Todd hired him to come do the test and share some of the knowledge so that Todd (and maybe me some day....future career in energy consulting?) can take over being able to provide such a service.  

Here's some pictures of the process. Preparing the blower door frame:
Getting the fan into place:

He prepped the system, turned it on and we watched eagerly to see where the numbers came in.  The gauge measures cfm's of air flow, which then gets plugged into a formula using the volume of the house to get an ACH number, so we couldn't tell at first where we were at in relation to our goal. The tester was baffled by the readings on the gauge because it didn't at first seem to be reading properly. He even opened a window to see how it would affect the readings, and the numbers jumped accordingly. Then he shut the window again, and basically said the readings were so low, he wasn't sure it would even calculate properly. Sure enough, when he plugged it into the computer, the program said the cfm figures (~60 cfm @ 50 pa) were too low to calculate ACH.  He tried a few different numbers that were artificially high, and it accepted ~75 cfm, which translated to 0.15 ACH, meaning we were nearly at 1/10th of our goal! Wow! 

In his 30 years of doing blower door tests, he had NEVER seen a house come in that low, by a lot! Todd also testified that we had blown away (no pun intended!) the air tightness records that he had encountered among his SIP (structural insulated panel) colleagues!  

Todd and I were pretty happy about the results for sure, but to rain on our own parade a little bit, it was so low that we both actually questioned the accuracy of the test. Was it done right? Did we miss something? Todd had definitely gone to great effort to ensure all leaks were sealed and that the high quality windows and doors I selected were installed properly. BUT, he didn't think he had done anything really out of the ordinary, and it is considered difficult to construct a house under 1 ACH. Also, to be clear, air tightness and blower door tests are by far not the only measure or indication of energy effiency or good quality, etc.  (If you're still interested in all this and not yet bored by it, see the following for an in-depth discussion about this particular topic: http://www.buildingscience.com/documents/insights/bsi-053-just-right-and-airtight).  There are plenty of people that don't believe that tighter is necessarily better; and/or that too tight can be problematic. Hence the "build it tight AND ventilate right" jist of the linked article.  We're hoping that we got both pieces of that puzzle right!  

And, because of our doubts with the test, we are actually having it redone next with a smaller fan that will hopefully give us a more accurate reading to at least have an accurate number to brag about! 

Enough for now. Thanks for sticking with me. More fun visuals next post (hint: we've got drywall in place - it's really starting to look like a house)!

9.10.2014

When a 3 year old is quiet...

I was getting ready this morning when I realized that the house was suddenly, oddly quiet.  I hadn't heard anything from my three year old the last several minutes. 

Before I even turned the corner, I knew I would find something disastrous, messy or entirely amusing.

Thankfully it was the latter!

Who knew I even owned lipstick?! Somehow Marlin found it (again - yes one other time he had put it all over his mouth). This time he had even more fun with it - rubbed it all over both cheeks, mouth and both sides of both hands!


9.04.2014

10 years and counting

It's been a great first ten years of marriage. Hard to believe how fast it's gone, and looking forward to what the next ten years will hold for us! 

Happy Anniversary, Dear Husband!